help with codes, and tranmission
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
ok so i had a buddy of my dads come by and put his snap-on scanner on and came up with code 122(tps) and 565(canister purge valve), the tps is dead it isnt getting no reading and we even disconnected it and nothing changed. so i going to pick up a senor tomm and a t/b gasket(any idea how it will take to replace)
now for the hard part the canister purge valve, i been calling around and no one has it in stock and rather costly at 120 from auto zone (special order). any suggestions as to what other options i have. being the valve don't affect driving , should i just say screw it?
now for the hard part the canister purge valve, i been calling around and no one has it in stock and rather costly at 120 from auto zone (special order). any suggestions as to what other options i have. being the valve don't affect driving , should i just say screw it?
Last edited by ymeski56; Apr 12, 2011 at 10:15 PM.
Thread Starter
Member
Joined: Apr 2011
Posts: 30
Likes: 0
ok really confused now. i was told the canister purge valve needed replacing, then this guy pointed me to a solenoid about 2" from TB that hooks to a vacuum port then runs over to a canister on the passenger fender. been tiring to find this part but when i pull up auto zone and see the picture it looks nothing like what i have(i know pictures arent always right but...) what is the solenoid he pointed to and said replace that? it looks to be about 1.25" round and has 2-1/8" ports on the bottom, one runs to bottom of TB and then comes off and run to that canister on TB....is this the right solenoid or do i need to be looking for something else and this guy is a idiot?
here's a pic of what he said replace
or do i need this?
here's a pic of what he said replace
or do i need this?
Last edited by gokartrule; Apr 13, 2011 at 10:18 AM. Reason: pictures didnt show up.
Thread Starter
Member
Joined: Apr 2011
Posts: 30
Likes: 0
yah probably will go to junk yard i actually didnt even think about it? just got to figure out what part i really need. where is the evap canister purge valve located at?
and WTF i never seen a tamperproof phillips head screw....thats going to be fun.
and WTF i never seen a tamperproof phillips head screw....thats going to be fun.
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
'Has been know to be closely associated w/...the EVAP Canister."
Two beer job w/ the right tools.
Last edited by ymeski56; Apr 13, 2011 at 12:05 PM.
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
