Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Engine squeal

Thread Tools
 
Search this Thread
 
Old Mar 12, 2014 | 04:45 PM
  #1  
BROWNINGFX4's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2010
Posts: 5,831
Likes: 28
From: Panama City, Florida
Default Engine squeal

When I'm at a stop and push in on the gas I hear a squeal.. As well as when I turn my truck off I hear a squeal.. Any idea what this is?
Reply
Old Mar 12, 2014 | 04:52 PM
  #2  
flareside crazy's Avatar
Senior Member
 
Joined: Nov 2013
Posts: 1,095
Likes: 56
From: greatest state in U.S. (Texas)
Default

tensioner maybe?
Reply
Old Mar 12, 2014 | 06:25 PM
  #3  
1996f150.5.0's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 146
Likes: 3
From: olive branch MS
Default

Maybe also be the idler, both compleat lay locked up on mine this weekend
Reply
Old Mar 13, 2014 | 11:05 AM
  #4  
BROWNINGFX4's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2010
Posts: 5,831
Likes: 28
From: Panama City, Florida
Default

I'm gonna take the belt off in a few minutes and see if I can find the culprit
Reply
Old Mar 13, 2014 | 02:56 PM
  #5  
BROWNINGFX4's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2010
Posts: 5,831
Likes: 28
From: Panama City, Florida
Default

Just through a new serpentine belt on and it's find now... Noisiest damn belt I've ever had on a truck
Reply
Old Mar 13, 2014 | 10:05 PM
  #6  
Rednecker's Avatar
Member
 
Joined: Nov 2013
Posts: 34
Likes: 1
Default

My 1990 ford f150 squeals for some odd reason, it does it when I turn my truck on. I replaced the water pump and the belt and the tensioner but it still squeals!
Reply
Old Mar 14, 2014 | 12:30 AM
  #7  
billiards101's Avatar
Member
 
Joined: Mar 2014
Posts: 49
Likes: 2
Default pulley

It could be the bearing going out of one if tour pulleys..air conditioner,alternator, or maybe power steering pump...it's just my input..it's a possibility.. good luck...
Reply
Old Mar 20, 2014 | 09:24 PM
  #8  
Rednecker's Avatar
Member
 
Joined: Nov 2013
Posts: 34
Likes: 1
Default

Originally Posted by billiards101
It could be the bearing going out of one if tour pulleys..air conditioner,alternator, or maybe power steering pump...it's just my input..it's a possibility.. good luck...
Come to find out I was putting the tensioner on wrong. I wasn't putting it on back wards, you able to move it left or right because the little just gives it enough room for you to move it before you tighten it I had it as for left as it would go and it seqeuled a lot but when I moved it as far right And thighten it up it does not sequel at all. But I do need to replace my power steering and alternator
Reply
Old Mar 20, 2014 | 09:27 PM
  #9  
BROWNINGFX4's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2010
Posts: 5,831
Likes: 28
From: Panama City, Florida
Default

Mines back to squeeling again but doesn't squeel all the time..
Reply
Old Mar 20, 2014 | 11:17 PM
  #10  
Mista_Breeze's Avatar
Formerly "the_breeze"
 
Joined: Aug 2012
Posts: 575
Likes: 12
From: Canton, OH
Default

Mine squeals when it gets wet and when its cold out. I've replaced the belt twice and it still does it, but if I put a dab of dielectric grease on the belt it shuts it up for a few days.
Reply



All times are GMT -4. The time now is 05:42 PM.