Nope, just one for a 4 speed 2wd.

 

why not cut the rivits on yours and move it to fit where you need it?

why does eveyone make things so much harder than they have to be? lol

i dont know how many people told me i couldnt do something to my truck and i proved them wrong.

 

A build only turns out as good as the time and effort you put into it. Nothing will be spared, no corners or frame components will be cut.

 

im lovin this thread

 

I will say, I had a 95 f150 4x4 with 3.55 gears ls, and a 5 speed, that truck would make it to about 112 mph before hitting the red line (dont ask why I was going that fast, long story) , at 75 mph it was between 2400 to 2700...I dont remember exactly. I also had 31x10.50 tires

my 95 f250 diesel with 4.10 gears, and a 4 speed auto is at 2600 at 73 mph

 

So I had the truck on the interstate and went to upstate NY last month did fine. It just wants to decelerate abnormally. Anyway, front axle is a 3:54 gear . And I have all my parts gathered. After these animalistic thunder storms and tornado warnings stop I'll do my swap and post results...