302 Performance
Thread Starter
Senior Member
Joined: Oct 2009
Posts: 243
Likes: 1
From: Dodge, Ne
I do have MAF in the truck already and I'm on budget about $900 maybe a little more depends when I get paid. I'm also looking at just exhaust and maybe a Jet chip computer module. Any recommendation would be greatly appreciated.
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Senior Member
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Ya know what, If you read a lot (most) of my posts, you'll notice I am an ardent promoter of humor & mild sarcasm. However, after re-reading my post in question, I believe my comment knocks hard on the door of rudeness, and for that I apologize. And while I think there's plenty of room for humor, there should be no room for rudeness (maybe just a smidge,....on my birthday?). That being said, Here's a link that will give you more than you even want to know about Ford Fuel Injection Systems, including MAF! Had I just posted the link is the first place, I could have saved myself the apology. So with no further ado: http://www.fordfuelinjection.com/ And good luck in that Quake IV tournament! <====(JOKE!) One more thing. As far as "Search Engines" are concerned, "BING" kicks "GOOGLE's" a*s, all the way home!<====(NO JOKE!)
Last edited by ymeski56; Nov 11, 2009 at 12:07 PM.
Member
Joined: Oct 2009
Posts: 71
Likes: 0
hey guys I have read about 40 pages of the link that talks about upgrading the ignition system. that being said does anyone know if I am able to just walk into shucks and buy all the parts I am going to need? if so does anyone know the model numbers or better yet part numbers I can just give to them to purchase? I want to make sure I get the right coil and the right wires. plugs seem easy enough.
JOHN
JOHN