Gauge cluster swap
#1122
The FORScan Guy
Here's the red filter stuck behind some of the outside tick marks loosely with the blue numbers:
Purple done the same way:
Purple done the same way:
Last edited by Livnitup; 08-28-2017 at 12:45 PM.
#1124
The FORScan Guy
Here's Yellow:
The following users liked this post:
2016BoostedGreyGoose (08-28-2017)
#1125
Senior Member
iTrader: (1)
Yellow from about 4.5k up looks VERY oem and nice. The other colors are for fruit cakes and ricers! Lol j/k, but you guys know me and my obsession with mods integrated so that they look oem. Hey Living up...I have other ideas...I'll pm you, but after I donit! My Amazon order arrives tomorrow. ...lmao! Thanks for all that you do. Your a machine!
The following users liked this post:
Livnitup (08-28-2017)
#1126
Man O' Man! After a few weeks of reading this ginormous thread, I finally got to the end! (OK, I did skim a few pages that weren't really helpful, lol). I must say that it's very cool to see how things have progressed from the beginning until now. Lots of questions of uncertainty that were answered, things that a dealer said could not be done, were actually done and after all this, no major cattasporhies to report. I've been sold for a while now and have been waiting for Livnitup to get back with me on a new 8 inch cluster. It will be a Canadian converted to a U.S. gauge. Not worried at all, as I know the swap/conversion has been successfully completed multiple times. After many messages back and forth, I can say Livnitup is a stand up guy. Thank you for all the answered questions my friend!
P.S. After at least x10 years, I have made it back to the homeland! LOL. I was a member way way back in the day with my 04' Lariat Supercrew. Wish I still had that log in. Anyhow, Good to be back!
P.S. After at least x10 years, I have made it back to the homeland! LOL. I was a member way way back in the day with my 04' Lariat Supercrew. Wish I still had that log in. Anyhow, Good to be back!
Last edited by Blue333; 08-28-2017 at 02:32 PM.
The following users liked this post:
Livnitup (08-28-2017)
#1127
Senior Member
iTrader: (2)
I can't say I was a fan of the red LED swap, and never expected to be, but I am definitely digging the blue numbers!
Two questions:
- Are the gauge faces glued to the cluster or just in place with locating pins and pressure to hold them down? (ie, Any concerns of them lifting over time or needing to be reglued?)
- Feel like taking a stab at blacking out the Km/H lettering for a cleaner look?
I'm pretty sure this mod is going to be done in the very near future!
Two questions:
- Are the gauge faces glued to the cluster or just in place with locating pins and pressure to hold them down? (ie, Any concerns of them lifting over time or needing to be reglued?)
- Feel like taking a stab at blacking out the Km/H lettering for a cleaner look?
I'm pretty sure this mod is going to be done in the very near future!
#1128
The FORScan Guy
I can't say I was a fan of the red LED swap, and never expected to be, but I am definitely digging the blue numbers!
Two questions:
- Are the gauge faces glued to the cluster or just in place with locating pins and pressure to hold them down? (ie, Any concerns of them lifting over time or needing to be reglued?)
- Feel like taking a stab at blacking out the Km/H lettering for a cleaner look?
I'm pretty sure this mod is going to be done in the very near future!
Two questions:
- Are the gauge faces glued to the cluster or just in place with locating pins and pressure to hold them down? (ie, Any concerns of them lifting over time or needing to be reglued?)
- Feel like taking a stab at blacking out the Km/H lettering for a cleaner look?
I'm pretty sure this mod is going to be done in the very near future!
Last edited by Livnitup; 08-28-2017 at 03:10 PM.
The following users liked this post:
2016BoostedGreyGoose (08-28-2017)
#1130
The FORScan Guy
Ok, here it is done quick & dirty with black electric tape on the back. You can still make out the km/h markings because of the white markings silk screened on the front but it dims it quite a bit. Note: they appear moreso than the pics because I have to mess with camera settings to try to come close to what the blue looks like (it's deeper and darker than the blue looks in the pics).
Last edited by Livnitup; 08-28-2017 at 03:31 PM.
The following users liked this post:
danlong (08-28-2017)