dirtcrew51m

Driver side not working, pass side ok, I checked the drivers side switch, tests ok, new actuator, tested and working, didnt check the pass switch, all wires look good, could the passenger side switch be bad? Or should I look elsewhere?

Just call me Sean

iTrader: (1)

Did you check for power at the actuator plug?

dirtcrew51m

I am getting 12v +\- when switched on one wire, but millivolts on the other, I will swap the window switches from my other truck and see what happens, hopefully it is that simple.

Just call me Sean

iTrader: (1)

Those two wires flip flop between ground and power depending on which way the switch is pressed.