f150cam

http://powerstrokenation.com/forums/...=interior+mods

it has alot of mods in it, i dont really want to dig through and find both of those but you may find others that will interest you.

Brandon587

Thanks, and also another question, do you or anyone know of a good power wire to tap into that is still controlled by my dash gage light dimmer so that I can have my lights wired up for under the dash and they dim with the dash lights? and also a good ground wire or place to ground.

Rockyamp3

I just wired up led strips for the doors and dome lights going to put some under the dash to. There blue.

Brandon587

Are you tying your under the dash lights with the dimmer switch that dims the dash lights? If so what wire will you be taping into? And what power wire did you tap into for the door lights? did you tap into the lights that are already there?

Rockyamp3

I cut the bulbs off and wired the LEDs in there place. I'm going to tap my under dash lights into the door lights to. But I found some led strips I want to put on my dash that I want to tap into my dimmer switch. Haven't really put a lot of thought into it yet. But when I do I'll let you know.

Brandon587

You replaced the bulbs with leds, or you tokk out the bulbs and wired in leds? If so, which wire is power so that I can't tap into it for under the dash lights. Or am I misunderstanding?

Rockyamp3

I cut the wires behind the bulb and wired in the LEDs. There are no bulbs now. There's two black wires the one with the white strip Down it is the neg wire solid black is positive wire.

Rockyamp3

Make sure u get the 12 volt dc LEDs any LEDs at advance or auto zone will work. The ones I got you can cut in 2in increments. if you cut them u can always soider wires onto ur left overs. That's what I did with my dome light I have 4 2in strips wired together.

Brandon587

Ok thanks, Im just going to tap into that to run my lights for under the dash. My lights are small 12v neon lights someone gave me, or I think they are neon, they arnt led for sure. I hope they dont draw too much power and pop my fuse, then Ill just add a fuse in my fuse box for them seperatly.

unit505

Sorry for the late response. Don't remember the year, but almost any lighted mirror will work. Just wired into a hot in the fuse box. The notch for the wiring is already in the top windshield trim. I'll post the mirror pic in a bit. As far as the dome light....well, let's.just say that I don't really have access to the '94 right now where I installed it. Been separated for almost 2 weeks from my wife. Don't see me getting any pics of it in the near future.