Topic Sponsor

Third Brake light

Thread Tools
 
Search this Thread
 
Old Yesterday | 10:03 AM
  #11  
fork off's Avatar
Thread Starter
Senior Member
5 Year Member
 
Joined: Jun 2019
Posts: 256
Likes: 5
Default

Found it 3M Windo -Weld Ribbon sealer
Reply
Old Yesterday | 10:10 AM
  #12  
manicmechanic007's Avatar
Senior Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Apr 2023
Posts: 4,290
Likes: 1,387
From: Near Salt Lake City
Default

All about the same
I just got that roll on Ebay for cheap
Look for uncured butyl rope
The 3M stuff is probably better quality if it is uncured rope
Reply
Old Yesterday | 10:12 AM
  #13  
fork off's Avatar
Thread Starter
Senior Member
5 Year Member
 
Joined: Jun 2019
Posts: 256
Likes: 5
Default

Ok will do you just saved me again
Reply
Old Yesterday | 01:30 PM
  #14  
fork off's Avatar
Thread Starter
Senior Member
5 Year Member
 
Joined: Jun 2019
Posts: 256
Likes: 5
Default

Hi this may seem stupid but can you tell me when you use byte rope do also use the original new third brake light foam gasket that comes with light
Thank you
Reply
Old Yesterday | 04:25 PM
  #15  
manicmechanic007's Avatar
Senior Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Apr 2023
Posts: 4,290
Likes: 1,387
From: Near Salt Lake City
Default

You can skip the foam unless it looks good around the outside
I have done it both ways
The butyl will seal the water intrusion into the cab with or without the foam
Reply
Old Yesterday | 04:59 PM
  #16  
fork off's Avatar
Thread Starter
Senior Member
5 Year Member
 
Joined: Jun 2019
Posts: 256
Likes: 5
Default

Got it
Thanks very much
Reply
Old Yesterday | 05:16 PM
  #17  
90project5.0's Avatar
Senior Member
Photogenic
Community Builder
Community Influencer
Liked
 
Joined: Aug 2025
Posts: 579
Likes: 106
From: GA
Default

Yeah, good to know that don’t fit at all right! I’d the butyl rope the same stuff that was used to seal the two sides of the air box where the evap core is?
Reply
Old Yesterday | 05:26 PM
  #18  
fork off's Avatar
Thread Starter
Senior Member
5 Year Member
 
Joined: Jun 2019
Posts: 256
Likes: 5
Default

Well I have also sent the pictures to Matt at Bronco Grave yard when you get the light it is sealed in a bag maybe he does not know what his supplier is sending I was wondering if they sent me a Bronco one by mistake because that is listed only for the bronco . any way will get to the bottom of it but happy I learnt about the butyl rope
Thanks
Reply




All times are GMT -4. The time now is 12:54 AM.