Hi does any one happen to know the steps to find a coolant leak 1994 f150 4.9 300-6 and what would be the correct pressure test tool for this stock radiator .
Thank you

 

First step, look.
Small leak? You cant see it?
In the front on engine? Radiator?
Rear of engine? Whereabouts is it?

 

Most auto part stores will rent out a pressure tester that comes with the correct adapter for your radiator, you could also add a uv dye to the coolant and fins the leak with a blacklight.

 

Thanks I do not know I was driving then when Parked there was a puddle under truck so I have to see what the damage is .

 

Not much for auto part rental in The great white North

 

The system needs to be pressure tested. Many parts stores will loan what is needed with a deposit or you can buy one for keeps.


I would pay special attention to the weep hole on the under side of the water pump.

 

Thank you

 

Hi does any body happen to know the correct size fan clutch wrench tools for 1994 f150 300-6 4.9 automatic .
Thank you

 

Ed is right - the first step is ALWAYS visual inspection. For a puddle under the truck, look straight above to see where it's dripping from. THEN follow the leak path forward & up to the leak source - DO NOT assume it's leaking out from where it's dripping off, which is RARELY the case.

When you need a tool, try searching Amazon for it first: Even if you don't buy it there, it can be informative.

 

Thank you . I usually do look at amazon but no one seems to say the exact model they just say most fords .you tube said 58mm pulley holder ebay 57mm .
Napa universal pulley holder 36 and 40 mm wrench so I always check the forum incase some has the exact same truck.
Any way Thanks again for all your help as usual .