Bought a1995 F150 to work on. Making good progress but I can’t find a diagram of the vacuum lines. I know there is a general diagram on the hood but it’s not very helpful. Anyone out there with a better diagram?
thanks
Mbarnes1202

 

https://www.fullsizebronco.com/threa...rubber.192382/

 

No, that's a very specific diagram.Why not?No, the best diagram available is the one Ford stuck to your truck.

 

2010 ford f150 4x4 5.4 v8 vacuum brake booster hose replacement videos anyone?

 

No, thanks. This forum is for pre-'97 F150s, so we don't need that.

 

If you want to delete the EGR system and the exhaust bypass pipe on the rear of the heads you can just delete the whole vacum system and just run lines from the vaccum tree on the upper intake to the fuel rail pressure regulator, and to the heater blender lines by the core and get rid of the rest of the connections. If you leave the sensors plugged in and get an egr dummy plug it wont throw a code and the engine will run better and get a few more horse power.

 

That's entirely RONG, illegal, & counterproductive. Read the bottom half of this page:

(click this text)


And this thread has been dead for months.

 

Oh very true but being in Michigan means there are no emmissions tests and plice can't make you open your hood without a warrant.