Any have these or any experience with these? I知 doing aftermarket LEDs on my 2017 F-150 XL. As of now, I知 looking at these Supernova V.4 and the DD SL1.

 

No V4 but do have V3's on my and SL1's on sons f150. Be careful on the branding SupenovaLED's V4 is not the same as S V4's sold thru Headlight Revolution.

 

So, are the SV4痴 from HR the way to go? What do you think of your sons SL1痴?

 

SL1's are in my son's 2019 XLT, not "quite" as much light (but damn near), as my own V3 but very good pastern and cutoff. The HR S V4 are current best design (apparently), far as size and location of the light emitting chips, duplicating the specified filament location for the bulb size.KM

 

is this the one for the f-150s?
https://headlightrevolution.com/s-v-...h11-h16-bulbs/

 

Yup, low beam's H11. High beams 9005's. On my son's 2019 and my 2017. KM

 

awesome! Thank you

 

F150 DON, if you go with these do pay attention to the orientation of the bulb installed, it's in the manual supplied. Then do a proper headlamp adjustment, I even lowered my cutoff from factory recommendations due to the improved visibility, dropped the cut-off 2 inches at 25 feet. KM

 

did you or your son purchase extended dust caps?

 

I did with the V.3 as they use braided copper heat sinks. My son's SL1 install used the OEM covers. KM