When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I ordered the G11 for the Low Beams and Fog Lights. I was looking for install videos and I found one for the XHP Series. What's the difference between that and the G11? Should I have gotten the XHP for the Fog Lighst? Does the G11 have the ballast with it too? I ordered the Flicker Resistors for the Low beams, but not for the Fog. Not sure if they needed them or not. Sorry for the confusion. That's only because I am... :-)
Did you get these bulbs? Can you comment on how the install went and how they perform? And your overall opinion. Thank you.
Bought my Highs, Lows and Fogs from F150leds.com.
Great product, does require a bit of trimming of the inner housing to get them adjusted properly so you're not blinding people (at least for me).
The nice thing about their kits is that they come with new larger dust covers so that the fans on the bulbs can actually efficiently circulate air to cool the bulbs.
The fog lights do not have fans on them but do have an external driver that just plugs inline from the stock harness.
Bought my Highs, Lows and Fogs from F150leds.com.
Great product, does require a bit of trimming of the inner housing to get them adjusted properly so you're not blinding people (at least for me).
The nice thing about their kits is that they come with new larger dust covers so that the fans on the bulbs can actually efficiently circulate air to cool the bulbs.
The fog lights do not have fans on them but do have an external driver that just plugs inline from the stock harness.
Bit of trimming. I would hate to do that to my new F150. What do you mean by trimming? Any pics you can share? Is there any LED that works in the 18 and 19 model low beams that has NO issues?
Thank you.
Bit of trimming. I would hate to do that to my new F150. What do you mean by trimming? Any pics you can share? Is there any LED that works in the 18 and 19 model low beams that has NO issues?
Thank you.
I just used a small Dremel tip to get in the inside of the housing and trim a bit of the plastic out at the top so you can properly adjust the bulbs. Wasn't anything major and the dust covers still seal on the outside of the housing as they should.
As I researched it seemed as though all of the good ones (they all have fans to keep the leds cool) need a larger dust cover (for better air circulation and to fit on the low beams) and also would need this similar trimming to get the bulbs adjusted properly.
If you don't want to trim them then I guess you could leave them adjusted way to high and be one of "those a**holes"
Last edited by MurpheyJr9615; Jul 11, 2019 at 10:08 PM.
Throwing our "hat" into this ring. Our bulbs do not use fans or oversized heat sinks but .
In all our testing, there are 2 bulbs we know of that work great, the Diode Dynamics (which we sell at 10% off) SL1 and our own Luxen high powered bulbs.
Throwing our "hat" into this ring. Our bulbs do not use fans or oversized heat sinks but .
In all our testing, there are 2 bulbs we know of that work great, the Diode Dynamics (which we sell at 10% off) SL1 and our own Luxen high powered bulbs.
