Load distributing threshold
#11
I have a 7x16 enclosed, steel frame, tandem. Weighs 2290 if that helps.
Personally, I wouldn't use a WDH with what your carrying.
As someone mentioned, the sway is noticeable when passing large vehicles.
Personally, I wouldn't use a WDH with what your carrying.
As someone mentioned, the sway is noticeable when passing large vehicles.
#12
Senior Member
Thread Starter
Ended up towing the trailer with the 1,140 lb. Polaris Ranger in it, plus some camping gear, with no load distributing hitch this weekend. Loaded the Ranger with COG as close as I could get it to being over the centerline of the trailer axles. Had no issues with sag at the hitch, and the trailer pulled down the interstate just fine.
I assume my Monroe load leveling rear shocks are helping out some with that task. I think my setup will be just fine, as I won't be towing it very often anyhow. Thanks guys.
I assume my Monroe load leveling rear shocks are helping out some with that task. I think my setup will be just fine, as I won't be towing it very often anyhow. Thanks guys.