SDDesigns 2018 SCrew XLT 4X4 5.0 Supercharged "50WOT"
#32
Doesn't matter!
Thread Starter
The following users liked this post:
riverracerxxx (06-21-2021)
#33
Doesn't matter!
Thread Starter
I'd forgotten @Grim Reaper did that. Haven't seen from him for awhile, but he's another that always does quality work. There was someone more recent though, within the last 2 weeks that did a nice job too.
#34
Senior Member
#35
Doesn't matter!
Thread Starter
Had a productive day mod/upgrade wise.
Received my new dash cluster from @Clusters by Livnitup what a simple upgrade that makes such a big difference.
The only simpler mod that I did was replacing my valve stem caps with .40 cal shells.
I also got my @BuiltRight Industries Dash mount installed with my iPhone charging cradle wired to the lower USB port below the climate control panel, the windshield mounted Edge Insight CTS2 wired to the ODB II port, the Garmin nuviCam LMTHD wired to the accessory circuit, and the Hill Decent Dash Switch.
Received my new dash cluster from @Clusters by Livnitup what a simple upgrade that makes such a big difference.
The only simpler mod that I did was replacing my valve stem caps with .40 cal shells.
I also got my @BuiltRight Industries Dash mount installed with my iPhone charging cradle wired to the lower USB port below the climate control panel, the windshield mounted Edge Insight CTS2 wired to the ODB II port, the Garmin nuviCam LMTHD wired to the accessory circuit, and the Hill Decent Dash Switch.
Last edited by sddesigns; 10-04-2018 at 07:51 AM.
The following 7 users liked this post by sddesigns:
johnday in BFE (10-03-2018),
Liv'nbytheBungie74 (09-11-2020),
Livnitup (10-03-2018),
ManMountainDean (10-04-2018),
MrQuinn (02-15-2019),
and 2 others liked this post.
#36
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Nice work for a day, that gauge cluster really looks good
On another note, I went back 2 weeks on the "What did you do to your truck" thread, and didn't find the post about the tails. Almost thinking it may have been in someones build thread.
On another note, I went back 2 weeks on the "What did you do to your truck" thread, and didn't find the post about the tails. Almost thinking it may have been in someones build thread.
The following users liked this post:
sddesigns (10-04-2018)
#37
Doesn't matter!
Thread Starter
Thanks, not bad for 2 hours...lol I started at 4 when I got home from work. I bought the Testor's red lunchtime, so I'm hoping to get that done this weekend. I did drop off the new factory ready to paint front bumper at the powder coater yesterday, I was hoping to get it back before the weekend, but I'm not holding my breath.
The following users liked this post:
johnday in BFE (10-03-2018)
#38
Doesn't matter!
Thread Starter
Sorry missed your post yesterday, yes it's under the center seat of the flip down front seat. here's the part number VFL3Z-2806202-C.
#39
Senior Member
@mustanglvr66
Sorry missed your post yesterday, yes it's under the center seat of the flip down front seat. here's the part number VFL3Z-2806202-C.
Sorry missed your post yesterday, yes it's under the center seat of the flip down front seat. here's the part number VFL3Z-2806202-C.
#40
Doesn't matter!
Thread Starter