SDDesigns 2018 SCrew XLT 4X4 5.0 Supercharged "50WOT"
 

Finally, after nearly 40 years I'm back in an F150, my first was a 1979 F150 White Flareside with 351 Auto.

Here is the day I picked it up at the dealer. I was originally looking for an XL as basic as you could get, but as we all know it would have to have been specially ordered, cause dealers need options to make money. So this fit the bill as close as I could get without an order.

So here is a website I set up for my progress, this will always be a "Work in Progress" as with most of us!

50WOT is my name follow me on Instagram @50WOT

The day off the lot
https://cimg9.ibsrv.net/gimg/www.f15...eeb798684f.jpg

Current as of 5/22/2021

https://cimg0.ibsrv.net/gimg/www.f15...c3dc87bc48.jpg





Track Data and Videos

Pre Whipple Post #601, #604, and #610
October 2020 Stock Whipple Tune Post #1063
April 2021 #1157
July 2021 #1223
End of 2021 Season Personal Best Run #1249

Mods Done to Date

OEM Upgrades

Ford OEM STX Honeycomb White Sport Grill with Camera mounted Emblem Badge (post #54)

Ford OEM 2019 Limited Rear Bumper Powder Coated ( post ), ( post ), and (post )

Ford OEM F250 License Plate Light Assembly (post & post #477)

Ford OEM Lariat Black Matte Wheel Opening Moldings (post )

Ford OEM Front Powder Coated Bumper (post #81)

Ford OEM SE Black Headlights (post #81)

Ford OEM STX Powder Coated 20" Wheels (Winter) with General Grabber ATX 275/55R 20 T(113) (post #1283)

Ford OEM STX Black Painted 20" Wheels (Summer) with General Grabber UHP 275/55R 20 V(117) (post #1174)

Ford OEM Tow Hooks installed under the rear bumper (post ), (post ) and (post )

Ford OEM Tow Mirrors with Power, Turn Signals, Heated, and Puddle Lights (post )

Ford OEM Front Seat Lower Console Safe (post )

Ford OEM Tailgate Assist Shock (post )

Ford Performance Raptor Door Sill Plates (post )

Ford Performance Raptor Steering Wheel with Paddle Shifters (post )

Ford OEM Box Link Tie Down Interface Plates (post )

Ford OEM Perimeter Plus Security System and Remote Start with Custom Mount #JS7Z-19A361-A (post )

Ford OEM Hill Decent Dash Switch (post )

Ford OEM 36 Gallon Tank (post )

Ford OEM 7/4 Pin Trailer Connector and Wire Harness (post )

Ford OEM Modified Super 8.8 Limited Slip Differential

Exterior

Cervinis Stalker Hood Custom Painted Center Cowl (post #1135)

Avery Lower Side Panel Matte Black Wrap with 1/4" Reflective Pinstripe and B-pillars (post )

Leer 100XR Cap (post )

WeatherTech Stone and Bug Deflector (post )

WeatherTech Side Window Deflectors (post )

Husky Liners Rear Wheel Well Guards with Plastic Insert mod and SS Hardware (post )

Taillight Chrome / White Stripe Elimination with Red (post #66)

Diode Dynamic SL1 9005 High Beam and SL1 H11 Low Beam LEDs (post #775)

Diode Dynamics Switchback Turn Signal 7443 LED (post #776)

Diode Dynamics Fog Light LEDs Cool White (6000K) SLF 780 Lumen H10

Front Valance and Mounting Tab Trim removal (post )

McGard M14X1.5 Black Lugnuts and Locknuts

Curt Class IV Hitch (post #3)

Romik RAL-TB Running Boards (post #112)

RBP RX-2 Locking Fuel Door (post #121)

Ronin Factory .50 Cal Bullet Antenna (post )

.40 Cal Tire Valve Caps (post )

Custom Front Wheel Well Splash Aprons (post )

Interior

WeatherTech Front with Custom Badges and Rear Black Floor Liners (post )

RAM Laptop Pedestal Mount (post )

BuiltRight Dash Mount with iBolt iPhone charging/docking station to Sync3 (post )

BuiltRight Driver Side Rear Seat Release

Rear Seat Storage Barrier (post )

20% Tint Front Windows (post )

Continued

Bed Interior

BedRug (post )

4X6 Stall Mat modified to 5'5" (post )

Quick Fist Clamps with Steel Winter Shovel (post )

Electrical

Auto Stop Eliminator #AE000 (post )

The Timer Shop Drive Mode Memory Module Column Shifter 5 modes (post )

LED Light Replacement - License Plate, Taillights, Third Bake light (so far) (post )

Garmin nuviCam LMTHD GPS (post )

2018 8" Dash Cluster Upgrade (post )

JVC KW-M750BT 2-DIN AV Receiver 6.8" Touch Monitor (post )

Engine / Performance

Whipple Gen4 2.9L Supercharger w/3.85" Pulley Stage 2 with Boundary OPG Upgrade (post )

Boundary Crank Gear Sprocket Upgrade

UPR Single Valve Oil Catch Can

Borla ATAK Blacktip Cat-Back System (post )

Ronin Oil Drain Valve (post )

nGauge Digital Gauge Touch Screen Tuner/Datalogger Custom Vent Mounted with OZTune (post )

Mishimoto Aluminum Expansion Tank Micro-Wrinkle (post )

B&M HI-TEK Black Aluminum Differential Cover

JD Performance Solutions Dual Pump with Returnless Fuel Module (E85)

Injector Dynamics ID1050x Fuel Injectors

Suspension

RoadMaster Active Suspension #3611-Y {post #495)

Bilstein 5100 2.1" Level Front Struts and 5100 Rear Shocks (post )

Hellwig Rear Swaybar #7743 (post )

Software/Forscan

Interface Adapter ODBII USB ELM327 MS-CAN and HS-CAN switch

Remote Start / Shock Sensor Perimeter Plus

Bambi Mode

Hill Descent

LED Hyper Flash / Bulb out disabled

Spot Lights

Just getting the ball rolling with upgrades and mods.

Got the WeatherTech in channel AVS Ventshades and hood protector.
https://cimg5.ibsrv.net/gimg/www.f15...3bc9905993.jpg
https://cimg9.ibsrv.net/gimg/www.f15...53bd1ad2d4.jpg
https://cimg6.ibsrv.net/gimg/www.f15...830ba34d1e.jpg

Next was the Curt Class V 2" receiver.

https://cimg7.ibsrv.net/gimg/www.f15...da48fe29aa.jpg

The Husky Wheel well Liners and the DeeZee tailgate assist shock were easy installs.
https://cimg3.ibsrv.net/gimg/www.f15...2cb4ab0f50.jpg
https://cimg9.ibsrv.net/gimg/www.f15...ea3c2cc0b8.jpg

Doing the A.S.S. wire jumper was almost an immediate mod that needed to be addressed.
Black with Purple stripe and the White wires


https://cimg6.ibsrv.net/gimg/www.f15...4653868ed0.jpg

https://cimg0.ibsrv.net/gimg/www.f15...61b8acfd64.jpg
https://cimg1.ibsrv.net/gimg/www.f15...71324bba2e.jpg
https://cimg6.ibsrv.net/gimg/www.f15...bf3ca44ae6.jpg

The Rubber Stall mat was needed to keep the stuff put in the bed with the rugged liner from sliding all over the bed.
https://cimg4.ibsrv.net/gimg/www.f15...fc13237d13.jpg
https://cimg5.ibsrv.net/gimg/www.f15...8d5f9768d3.jpg

Was pretty tough to cut without the help of a circular saw.

https://cimg8.ibsrv.net/gimg/www.f15...d1e8d1e196.jpg

The first LED upgrade were the taillights, third brake light / bed lamp and the license plate lights.

https://cimg8.ibsrv.net/gimg/www.f15...51c7973e66.jpg

Nice truck! what are your plans for it overall?

Thanks!

Blackout matte finishes everywhere......Blackout lower belt, black Raptor rear bumper with Borla ATAK dual rear with black tips, front black bumper, black Lariat grill, blackout headlights, blackout taillights.

The bed is getting a cap this weekend, still up in the air about its blackout treatments ATM.

Haven't decided on the lift yet, maybe just the Bilsteins 2" level to start with Falken Wildpeak AT3's for this coming winter.

My web page has my items completed and to-do list, I'll be updating part numbers and picture links eventually.

Always a "Work in Progress"
https://sites.google.com/view/sddesignsf150/home

Did the BedRug yesterday.
https://cimg8.ibsrv.net/gimg/www.f15...980cf4b33b.jpg