Originally Posted by KingRanch4Life

Trying to compare i see.. lol... The difference is minimal but looks like alot..

Originally Posted by Fuugz

Mrocha, in that first picture, it is a BDS vs a Zone lift. I have the BDS, Rosie with the zone. We eyed each others trucks up and noticed that my rear end sits much higher than his, while the nose of his sits slightly higher than my own. Keep in mind that I also have the strut replacement up front as well as fox shocks in the rear.

Originally Posted by Mrocha85

Thanks Fuugz, debating on switching up my current lift.

Originally Posted by Fuugz

Not a problem man! I love my BDS lift. Great quality lift and I loved the little bit of customer service that I have experienced! I wish I would of been able to get the 8" right off the bat though

Originally Posted by Mrocha85

Yeah 8" will be my max.

Originally Posted by Mrocha85

Lol yes! Eyeballing a used 6" fabtech lift which I would bump up to a 8" with my level. Fuugz said he was about 46" from ground to fender. I'm at about 44.5" and even with the level I would be under 7". Plus I want to get those 22x12 and want to make sure I can clear them.

Originally Posted by KingRanch4Life

Yeah i'm at 44.5 to 45"... I have a 2" level which i'd be satisfied with 7" of length.. You should clear the X12 now...

Originally Posted by Mrocha85

If I can clear those 22x12 -44 offset with the same tires you have I'll be straight.

Originally Posted by Fuugz

I rub with my 6 and had to cut a good chunk off.

Originally Posted by Mrocha85

Where did you have to cut?