When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So new mirrors got here today - already pulled the mirror caps off. interesting that one side had foam tape on it. Was a PITA to get that one off. Going to get back with steve at tasca in a week or two and see what's going on with the
harneses.
So new mirrors got here today - already pulled the mirror caps off. interesting that one side had foam tape on it. Was a PITA to get that one off. Going to get back with steve at tasca in a week or two and see what's going on with the
harneses.
@smjx , Nice truck! What third break light are you using?
Raptor > and I ran the wire to constant power to be on with running lights
Originally Posted by Firerunner
How many tabs did you wind up breaking?
on one cap, only broke 1 off. On the other cap, I cracked 2 but didn't break them clean off. Time to hot glue gun them back together and give them to a buddy or keep them as a spare set
So Both sets of mirrors finally here. Going to be reselling the 15-17 set if anyone needs them. Also got my new raptor FCIM in tonight, and still running into programming issues that Firerunner is helping me out with. Trying to get that figured out, also scored a 16 platinum IMPB for a 100$ (Thanks Fire) , so looks like i'll be adding 360 cams a lot sooner than expected.
Got around to installing the 4 inch rear block today. Looks worlds better, the old block was a 5.25. Very happy with how it came out and how the truck is sitting now. Also IMPB is here for adding 360 cams - going to be working with Ryan for a harness for the mirrors - The door modules + harnesses are both backordered so going to be a bit until I do the mirror swap. Raptor steering wheel is on the way and will be here Tuesday
02-05-2019, 05:06 PM
