2016BoostedGreyGoose's XLT Sport Build, Yeah Finally
The following 2 users liked this post by 2016BoostedGreyGoose:
Johnny_bravo00 (05-13-2019),
sddesigns (05-13-2019)
#1522
Senior Member
iTrader: (1)
Since I wanted to do a "hybrid" 2018 swap (keep my 2016 bumper and only go with the 2018 headlights, bumper trim, and grille) I had to figure out a way to fabricate the upper bumper trim so that it would look more like it belonged on the truck rather than look like an after market piece. It was my 1st attempt at this type of fabrication, but I think it turned out the way I envisioned it would. I wanted to try and fabricate a somewhat complex contour to add an oem look. It was a chore but the experience was amazing!
I’m glad I follow you here and on IG
i feel like I get sneak peaks lol
i was eyeing that same hood with no vents
The following 2 users liked this post by Alvaro DV8DZ9:
2016BoostedGreyGoose (05-13-2019),
Apples (05-13-2019)
#1523
New double adjustable Belltech coilovers..... (adjustable compression and rebound)
Swapped out my old non heated Raptor wheel for a new heated Raptor wheel that I had re stitched in matching red to match my new red stitched Lariat dash pads.Also decided I wanted a little more CF so I had real CF formed on the top of the steering wheel. I didn't like the red sight line so I decided when the CF was done...to just delete it.
The following 6 users liked this post by 2016BoostedGreyGoose:
Apples (05-13-2019),
iaro@yahoo.com (12-11-2019),
Johnny_bravo00 (05-13-2019),
OCMike (05-13-2019),
sddesigns (05-13-2019),
and 1 others liked this post.
The following 4 users liked this post by 2016BoostedGreyGoose:
johnday in BFE (05-13-2019),
sddesigns (05-13-2019),
Truckin (05-15-2019),
TX_hornedfrog (05-13-2019)
The following 5 users liked this post by 2016BoostedGreyGoose:
Apples (05-13-2019),
Johnny_bravo00 (05-13-2019),
OCMike (05-13-2019),
sddesigns (05-13-2019),
SPOAT (05-18-2019)
#1526
TOTM November 2019
iTrader: (2)
The following 9 users liked this post by Summers22:
1995GreenMachine (09-25-2019),
2016BoostedGreyGoose (05-18-2019),
Apples (05-18-2019),
Brick'S hithouse (05-31-2019),
Crimson (05-18-2019),
and 4 others liked this post.
#1527
Senior Citizen Member
Join Date: Dec 2017
Location: Outside city limits TN
Posts: 4,347
Received 2,707 Likes
on
1,548 Posts
You have no idea how much @2016BoostedGreyGoose has given to this forum/community. He doesn't just share his truck, he shares his ideas, mods, tips, tricks, part numbers, details that many members forgo and don't pass on. He is selfless and gives back on many levels. No reason at all to invade his build thread just to be a smart ***. If you want to question him outside his build thread go for it. Here is not the place though.
The following 3 users liked this post by McLovin:
#1528
Thanks guys... again I am humbled by the show of support. I try not to politicize stuff. Just using this one spot as a way to share what I've been doing...good and bad. Some of you guys are simply awesome and all are respectful, even if you dont like or agree with something I've done you've always been completely respectful to disagree without being confrontational. Fortunate to be part of this community.
#grassroots!
#grassroots!
The following 7 users liked this post by 2016BoostedGreyGoose:
Apples (05-18-2019),
Firerunner (05-18-2019),
johnday in BFE (05-18-2019),
Livnitup (05-18-2019),
Lycan76 (09-02-2019),
and 2 others liked this post.
#1529
You have no idea how much @2016BoostedGreyGoose has given to this forum/community. He doesn't just share his truck, he shares his ideas, mods, tips, tricks, part numbers, details that many members forgo and don't pass on. He is selfless and gives back on many levels. No reason at all to invade his build thread just to be a smart ***. If you want to question him outside his build thread go for it. Here is not the place though.
#1530
The following 3 users liked this post by RayoVac: