techrep

iTrader: (1)

They are built to raise the front end of a stock truck 2.5” when you order the correct part number.

The new Rancho® Loaded quickLIFT™ technology includes the application-matched of quickLIFT with the addition of coil spring and upper mounting plate and no extra cost. Rancho® Loaded quickLIFT™ is finished in liquid metallic silver. This new product is very easy to install for do-it-yourselfers because it is one full suspension unit and generally can put on the vehicle in twenty minutes per corner. Loaded quickLIFT™ provides 1 to 2.5 inches of additional lift, allowing for the use of larger wheel and tire packages up to 35 inches, which provides an aggressive vehicle stance. Rancho® Loaded quickLIFT™ uses nine point tuning technology that easily adjust your ride quality and performance. It is also compatible with SEMA award winning Rancho MyRIDE™ Wireless Controller (part number RS999705) which allows you to control the units wirelessly from the cab.

Levels front suspension / Removes the factory rake
Clears up to 35-in. tires (select applications

truckdriverguy

I am just talking about the Monroe Quick Struts, not the Ranchos...

techrep

iTrader: (1)

You asked about putting a level kit on top of your new coilovers ... why not just buy a coilover that don’t need one.. $159 ea. @ Rockauto

truckdriverguy

I already purchased the level kit...

techrep

iTrader: (1)

Send it back... or bolt it onto your new coilovers before install.. no need to wait.

truckdriverguy

My only issue is if just the new struts/coils will raise the truck, then adding the 2"level on top of that, it will have "the squat" until it settles...

techrep

iTrader: (1)

If you buy a stock replacement coilover.. moog, Monroe or whatever brand you choose it will be the same as what you have now.. it will specify if it is made to raise front end. Depending on how many miles are on the old OEM coilovers.. a new set may bring it up some.. coil springs hold up the front end.. not the struts.