Gotts Mod
02-22-2011, 10:03 PM
#11
Member
Join Date: Feb 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
And do clean the maf, put in a new air filter and DO disconnect the negative battery cable for 20 minutes after completing the gotts mod. The engine computer will need to learn your truck like the ecm/pcm was new. Drive the truck modestly, at as many legal speed limits as possible within the first 20 minutes. Run the gas you will use while re teaching the ecm.
02-22-2011, 10:11 PM
#12
02-23-2011, 11:03 AM
#13
'08f150stx
the ecm is like otto said, it is the electronic brain of the engine that makes the changes the maf and other sensors read
Last edited by '08f150stx; 02-23-2011 at 11:05 AM.
02-24-2011, 09:53 AM
#15
'08f150stx
http://www.f150online.com/forums/art...005-5-4-a.html
But use MAF cleaner, you can find it at any parts store. do NOT touch the sensor inside of the maf. I gave mine short bursts of the cleaner. did not just soak it. between the bursts, I let the maf dry. make sure you have disconnected the battery cable before the cleaning the maf.
But use MAF cleaner, you can find it at any parts store. do NOT touch the sensor inside of the maf. I gave mine short bursts of the cleaner. did not just soak it. between the bursts, I let the maf dry. make sure you have disconnected the battery cable before the cleaning the maf.
02-26-2011, 09:06 AM
#16
Member
Join Date: Feb 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Add me to the list; Gotts mod is complete.
Only took about 10 min to do I used 3" sewer pipe fit with no sanding.
How can this not help? don't know if you can tell by this pic but what a change
Only took about 10 min to do I used 3" sewer pipe fit with no sanding.
How can this not help? don't know if you can tell by this pic but what a change
02-26-2011, 04:17 PM
#18
Junior Member
Join Date: Dec 2010
Location: Texas
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I did the mod yesterday but I didn't sand it completely since about 2" fit into the well, It goes through the first opening is about a few small centimeters from going out the other end.
Question is, will that cause a suction problem? I could easily sand some more.
Question is, will that cause a suction problem? I could easily sand some more.
02-27-2011, 05:39 PM
#20
The Gotts mod is a little different on an 09 to present and I read somewhere on here that someone did this mod on a 09 or 10 and they are afraid not that they are going to ruin their engine now? Can anyone verify this if it is true or not? I believe that the Gotts mod on a 2009 to present model is, you just pull the snorkel out of the airbox, no need to put it through the side wall?