I m not using the smog pump on my 95 f150 302. What lines do i need to plug if any. Thanks

 

Hi Jason;
I've removed the smog as well. I've removed the pump, all the lines to the cilinderheads and I blinded the holes in the heads with a plug, and the pipe which goes direct to the exhausttube is blinded off as well. What not to remove? The solenoids which controls the smogsystem. The PCM must think that everything is under control, but I've plugged the solenoids off as wel. It saves you weight and space; the sparkies are easier to swap.

regards Ton van der Sluijs

 

OK thank, what about the egr? is there a way to get around it without taking it off from the intake like a nipple to plug it?

 

They make a plate to cap it off. Its in the stang magazines

 

Yeah right; blind it off but leave it on the truck and let the vacuum hose and the connector on.... The PCM must think that everything still operates normally.
From the moment that I've blinded the EGR, idle runs better, fuelcons. improves and an EGR dirtens the engine. I had to swap the valves becuase the EGR leaves a lot of burned oil on the valves. Smog and EGR are there for the environment.... not for you.

best regards Ton van der Sluijs

 

Ok cool thanks! Yeah Im gonna plug everything off now

 

They also make dummy soleniods, also available in stang magazines and websites that trick the computer into thinking they are there. Or you can get a Dialo programmer.

 

What is a "Dialo programmer and for what purpose is it?

regards Ton

 

Diablo, sorry spelling, here is a link. http://diablosport.com/