Traction bars designed to work with flip kits?
#21
Senior Member
iTrader: (1)
[QUOTE=go-on3;5553579]Here's a kit for 15 up with FLIP kit...
http://www.calvertracing.com/store/7...led-p-235.html
Ask for Travis, best customer service ever. Tell him Neil sent you.
[QUOTE]
Nice but to UNBROKEN'S post, there are none that will work with the McGaughy's flip kit. I am guessing it will have to be custom fabricated. I was looking into a set about 6 months ago and finally gave up.
http://www.calvertracing.com/store/7...led-p-235.html
Ask for Travis, best customer service ever. Tell him Neil sent you.
[QUOTE]
Nice but to UNBROKEN'S post, there are none that will work with the McGaughy's flip kit. I am guessing it will have to be custom fabricated. I was looking into a set about 6 months ago and finally gave up.
The following users liked this post:
getwithit (11-30-2017)
#22
BGG... Don't buy yet ! Text me, On way to PRI with my protype product that I think you'll like. It's gonna be a game changer
The following users liked this post:
2016BoostedGreyGoose (12-22-2017)
#23
I have a 2014 Tremor I lowered 3/5 and did a 1 piece drive shaft from a local builder. I also moved shocks inside of the frame and did VAS traction bars. I am having the worst vibration issues, so bad it's taking out the rear bearing in the transmission.
#24
Senior Member
Any updates on the game changer?
I have a 2014 Tremor I lowered 3/5 and did a 1 piece drive shaft from a local builder. I also moved shocks inside of the frame and did VAS traction bars. I am having the worst vibration issues, so bad it's taking out the rear bearing in the transmission.
I have a 2014 Tremor I lowered 3/5 and did a 1 piece drive shaft from a local builder. I also moved shocks inside of the frame and did VAS traction bars. I am having the worst vibration issues, so bad it's taking out the rear bearing in the transmission.
#27
bump to an old thread... any updates on that game changer? Been wanting to get some installled with vikings but also need to have room for a bag set up.. honestly been holding up on the perf mods untill i get the suspension tied down... wheel hop city with a heavy foot
#28
Senior Member
Got a set of CalTracks on my '14 Tremor and blew out the driverside making a left turn. No not drifting either. anyway took the long bar off and full of corrosion.Threads rusted down to letting the bar fall off!! No prob. I got a welder and a nut. cut the old 1 off install new 3/4-16 nut. ok, here's where it gets better! Bolt Blast the banjo bolt on the bottom hanger,let set 3-4 hrs.rite. mounting bolt rotates in hanger w/banjo bolt, but won't turn or move any farther. Ball peen,? tried it, More BB,? sure. Next the Air hammer!!! NOTHING!!! Torch you ask?,.... to close to G Tank. no whammy-Kablammy here!. any ideas besides Cut-off wheel?
The following users liked this post:
TriSum (05-27-2020)