Traction bars designed to work with flip kits?
#1
Senior Member
Thread Starter
Traction bars designed to work with flip kits?
Having trouble finding a set for 2015+ trucks. Need a set designed to work with lowered trucks that have flipped axles. If anyone can point me in the right direction, I'd appreciate it.
Thanks
Thanks
#2
Senior Member
try VAS fabrication near Houston. You can find him on facebook, vic alma is his name. I have a set on my '13 with a flip kit, and I imagine they will work on yours or he can fabricate something. They are similar to cal tracs but a lot easier to install. And, they were only $337 shipped to san Antonio, but I would opt for the optional rubber snubber for another $12.
Last edited by rojizostang; 04-11-2017 at 03:14 PM.
#3
Lift,lower,stock,wrecked
Caltracs offer a kit to work with flip kits, I can't remember if they show it online but they told me that over the phone. Also Stifflers Long Bars should have their 15+ bars out by now, he told me back in November that they should be ready December 16. I just haven't had a chance to call and order them yet.
#4
Senior Member
Caltracs offer a kit to work with flip kits, I can't remember if they show it online but they told me that over the phone. Also Stifflers Long Bars should have their 15+ bars out by now, he told me back in November that they should be ready December 16. I just haven't had a chance to call and order them yet.
#7
Senior Member
I'll post up a few pics later today hopefully. I haven't been around here for a few days and missed the request for pics.
As far as ground clearance is concerned, I haven't scraped them on anything, yet. I will take some measurements also.
As far as ground clearance is concerned, I haven't scraped them on anything, yet. I will take some measurements also.
Last edited by rojizostang; 04-30-2017 at 10:13 AM.
Trending Topics
#8
Senior Member
traction bar pics as promised
I have about 4.5 inches of ground clearance at the lowest point. The ruler doesn't give a good indication because of the angle and the case of the ruler itself was in the way of showing a good measurement