Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Whats under my Kick Panel?

Thread Tools
 
Search this Thread
 
Old Oct 16, 2012 | 05:23 PM
  #1  
Heritage04's Avatar
Thread Starter
'04 Heritage XLT
 
Joined: Apr 2010
Posts: 184
Likes: 3
From: Jacksonville, NC
Default Whats under my Kick Panel?

I pulled the plastic kick panel out to look at the Airbag Control Module, but I am not sure if I am looking at an Airbag Control Module based on what I have seen online for them...

It's a 2004 Ford F150 Heritage XLT Super cab.




Haynes repair manual is very vague about Airbag work since they suggest you take it to a professional.
Reply
Old Oct 16, 2012 | 10:41 PM
  #2  
Heritage04's Avatar
Thread Starter
'04 Heritage XLT
 
Joined: Apr 2010
Posts: 184
Likes: 3
From: Jacksonville, NC
Default

bump. Can someone atleast confirm where I need to look for the Airbag Module Computer. I found a deal on Ebay but need to confirm what computer module I need.
Reply
Old Oct 18, 2012 | 01:35 PM
  #3  
CumminsNV4500's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 226
Likes: 4
Default

If I'm correct that is the fuel **** off inertia switch and air bags for the rear end of truck
Reply
Old Oct 18, 2012 | 05:10 PM
  #4  
Frank_Ford's Avatar
Ford Owner
 
Joined: Aug 2012
Posts: 1,073
Likes: 138
From: Wichita Kansas
Default

The switch on top is the Fuel inertia switch that shuts the fuel system off if you are in a crash. Up and to the left but out of the picture is the PCM (or computer that runs everything to us Kansas country boys). It sits next to the firewall of your truck and is plugged in on the other side of the firewall. Above the fuel inertia switch (also not in the picture) you should find your aibag diagnostic module. It is about 1 1/2 inches thick, 5 inches wide, and 6 inches long. It is plugged in at the bottom of the module. When you reach up there you can feel the PCM and the Air Bag Module and the PCM is bigger than the Air Bag.
Reply




All times are GMT -4. The time now is 07:40 PM.