Transmission and runability problems
02-20-2018, 10:47 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2018
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Transmission and runability problems
Tranny and runnability problems2 shift solenoid sensor faults and one tourqe converter fault. This is what the scanner shows but tranny and torque converter have been rebuilt and shift solenoid board replaced... What can I do to circumvent this issue? I feel like it' a wiring or pcm fault
02-20-2018, 10:12 PM
#3
Originally Posted by Minidiesel
Useless forum guys thanks for your help
02-20-2018, 10:20 PM
#4
Senior Member
So, you start 2 threads less than 8 hours apart asking the same question in both, and you call us useless? That's the best way to get help if I've ever seen it.
02-21-2018, 02:15 AM
#6
Senior Member
Post the codes, not what they mean, and we can help you better. Some codes, one digit apart, can mean a load of difference. We can try and help you, but the information you posted doesn't give the whole story, whereas the codes will help us zero in for a resolution.
I will say, that you did manage already to sort of PO one of the better transmission guru's on here, and that takes some effort. You seem to have that ability with your post anyways, so I shouldn't be surprised. Anyways, post up the codes, and we will try and help, and maybe give you and us a way to get back on the right feet.
I will say, that you did manage already to sort of PO one of the better transmission guru's on here, and that takes some effort. You seem to have that ability with your post anyways, so I shouldn't be surprised. Anyways, post up the codes, and we will try and help, and maybe give you and us a way to get back on the right feet.
02-21-2018, 06:27 AM
#7
Senior Member
Useless? In the 2 threads you started, you don't even post what year your truck is, what motor it has, what codes you have.... we don't read minds. You mam are the one that is useless.