I need to take off my dash to replace my bulbs but I can't figure out how to get it off..anyone know?

 

Easy! Start by taking out your light switch assembly then use a screwdriver pop off the part that wraps around right in front of the top of your steering wheel and take out the 3 bolts by your cluster gauge right above your cluster gauge then take out all the bolts holding on the part that your light switch came out of be sure to disconnect the switch assembly and there is a bolt behind where that assembly was and that piece will pop off then you just gotta take off all the bolts holding on the clear part on your cluster gauge then take out the bolts holding on your cluster gauge and as soon as you can disconnect the connectors on the back of your cluster gauge there are 3 of them then you're good! To take out that light switch is a pain... Turn your light switch all the way on then pull the switch out like you would to use stock fog lights take a screw driver pop the switch off then put it back on with the whit line facing 180 degrees from the all the way on position and turn it clockwise I believe as far as you can hold it and pull

 

That's all assuming you're replacing your cluster gauge lights