Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

system lean

Thread Tools
 
Search this Thread
 
Old Sep 11, 2011 | 09:06 PM
  #1  
98ford5.4's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2011
Posts: 383
Likes: 0
Default system lean

got a cel on my 98 5.4 and its for system lean bank 1 and 2 i think its fuel filter where is it located and how difficult is it to change
Reply
Old Sep 11, 2011 | 09:22 PM
  #2  
97SlowWhite's Avatar
I live 4 Him He died 4 Me
 
Joined: Aug 2011
Posts: 518
Likes: 1
From: Rio Grande City, Tx
Default

could be a leaking vacuum line or dirty maf sensor also

Last edited by 97SlowWhite; Sep 11, 2011 at 09:24 PM.
Reply
Old Sep 11, 2011 | 09:29 PM
  #3  
98ford5.4's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2011
Posts: 383
Likes: 0
Default

how would i check for vac leaks
Reply
Old Sep 11, 2011 | 09:40 PM
  #4  
97SlowWhite's Avatar
I live 4 Him He died 4 Me
 
Joined: Aug 2011
Posts: 518
Likes: 1
From: Rio Grande City, Tx
Default

a good ear, a good eye, or spray carb cleaner over possible areas.. including where the intake manifold gasket is
Reply
Old Sep 11, 2011 | 09:43 PM
  #5  
98ford5.4's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2011
Posts: 383
Likes: 0
Default

what do you listin for is it a distinced sound and wiull i hear it over the fan?
Reply
Old Sep 11, 2011 | 09:47 PM
  #6  
thepuma's Avatar
Senior Member
 
Joined: Sep 2011
Posts: 106
Likes: 0
From: carroll ohio
Default

listen for a hissing sound you should be able to hear it if it is big enough... does your car run a low idle or feel like its about to stall when you give it a little gas
Reply
Old Sep 11, 2011 | 09:48 PM
  #7  
97SlowWhite's Avatar
I live 4 Him He died 4 Me
 
Joined: Aug 2011
Posts: 518
Likes: 1
From: Rio Grande City, Tx
Default

yeah its gona be hard to hear it, forgot about the semi truck fan noise lol.. just spray cleaner. it will be easier and quicker. pay attention to engine idle change.
Reply
Old Sep 11, 2011 | 09:56 PM
  #8  
98ford5.4's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2011
Posts: 383
Likes: 0
Default

idle is fine doesnt jump or shake at all but when i give it gas under load(in gear) itl rev up the suddenly drop 600 rpm and is very sluggish
Reply
Old Sep 11, 2011 | 09:59 PM
  #9  
97SlowWhite's Avatar
I live 4 Him He died 4 Me
 
Joined: Aug 2011
Posts: 518
Likes: 1
From: Rio Grande City, Tx
Default

sounds like a vacuum leak to me.. gl and keep us posted
Reply
Old Sep 11, 2011 | 10:05 PM
  #10  
98ford5.4's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2011
Posts: 383
Likes: 0
Default

ok will do
Reply



All times are GMT -4. The time now is 07:54 PM.