Im looking to switch out my stock dome lights to LED. I got the main dome light out and i think its a 578. But i cant get the backseat lights out. Are they the same size as the main dome light or something different. If anyone has done this i would love some pics so i can see them installed cause the back seat light don't seem big enough to fit a led bulb. Thanks for any help its greatly appreciated. Attached the pic of the main dome light i removed is that a 578?

 

The back ones are the same size. You can pry the lens out of them to gain access to the bulb. It snaps in and out.

 

Yeah their all the sane size, the rear lenses have tiny arrows on them pointing at where to stick the screwdriver to pop them out

 

Yeah i got the lens out but cant get the bulb out. Too small of a area to fit my fingers to get it out. Have either of yall swapped yalls out for the led bulbs?

 

I just swapped in some green led strips on a friends truck and I popped the old out with a set of right angle needle nose pliers. It's easier snapping them in than taking them out

 

Are the map lights 912? These are the ones im looking at what do you think of them.

http://www.v-leds.com/6K-WHITE-3-CHI...-p9770321.html

 

Those look good, the maps are festoon bulbs too I think. The doors were the 912's

 

Before i order them guess i ill pull down the cover just to make sure so i dont order the wrong ones. Thanks so much for your help. Will post some pics of the install afterwards.

 

I popped the entire piece out then took the back off the lens. Makes it a little easier to get to. I put in all LEDs in my interior lights. They are 10x better.

 

Took off the dome light and looked you are correct they are 578 also. What door bulbs are you referring too?