have to replace the front lines on my 4x4 xlt. drivers front has a slight leak.
was wondering if they had a stainless kit.

or should i just buy OEM replacements.

 

In my '99, I bent my own from cupra-nickel line for all of them. Easy to work with, and won't rust. In areas I thought were vulnerable to being struck and damaged, I slipped vacuum line over it, and sealed the ends with E6000 adhesive/sealant. If that front line is rusted (only way I know it would leak?), carefully inspect the line going to the rear as well.
..

 

its not the hard line I need to replace. my bad for not making it clear.
its the brake hose from the hard line out to the wheel I need to replace.
would like to upgrade to stainless braided hose.

 

Try Here......https://www.autoanything.com/brakes/75A4620A0A0.aspx

 

These will probably end up on my '03 the next time I do brakes.

Stoptech 950.65001 Hydraulic Brake Line

 

Stick with the flexible hose. It's flexible for a reason.

 

I was looking at those (Ohio)

didn't know if the fitting would work, the factory ones are square.

mines an 03. also

 

Not sure of your point. The Stoptech lines I linked *are* flexible. They're stainless braid over Teflon hose.

 

Sorry for not being clearer on this. I was writing to the OP where it was said in the original post he was looking for a stainless kit and then in another post further explained he was looking to replace the hoses. The braided stainless are a good choice but they are still flexible hoses underneath the braiding. My point to him was not to replace the hoses with a solid, stainless tubing.

 

What nooo






yea I got that. its flexi for a reason.