power window
Senior Member
Joined: Nov 2007
Posts: 785
Likes: 1
From: Chuluota, Fl
do you think this could be the same problem with the unlock switch. my lock works on both sides but the unlock doesn't work on ether. I think wet there ink its from water because it gets wet there when the window is down. Ive done alot of hog hunting in that truck so its been wet there alot.
Thread Starter
pacotojo
Joined: Dec 2008
Posts: 9
Likes: 0
From: PA
could be the same
The locks work similar to the windows, the ground goes through the driver side switch then through the passenger switch so if it loses ground in the driver side it loses it everywhere...good luck..try the website that was mentioned earlier and get your diagram.. it should help
Junior Member
Joined: Dec 2008
Posts: 25
Likes: 0
Glad to hear your window now works. My passenger window is completely inop - but I can still roll it down and up with the driver side switch, so it doesn't bother me that much...
Thanks for the amazing website too!
Thanks for the amazing website too!
Thread Starter
pacotojo
Joined: Dec 2008
Posts: 9
Likes: 0
From: PA
crush a little car today
Joined: Jan 2008
Posts: 1,092
Likes: 11
From: royal oak, mich
Did a little research for my 02. Both switches are in series with each other, as I see it. Drivers door RH window switch and pass door RH window switch are in series with each other utilizing the center (not actuated position). Best if you go here: www.search.ebscohost.com
USER: greatfalls
PASS: publiclibrary
Select auto repair, year, make etc..
Good luck, I printed every page for my 02
USER: greatfalls
PASS: publiclibrary
Select auto repair, year, make etc..
Good luck, I printed every page for my 02
