hey everyone, i have the AR136 wheels on my truck and are in bad need of center caps. i measured the hole and it measures to be 3 3/4 inches, but i have no idea what ones i will need. i was looking at my rims and noticed that three hub holes are the same for the center caps to snap into but one is different, can u tell me y? is this how they came as a set and the caps will fit? please help. the first pic is the type of wheel i have, the second has a narrow lip outside for the center cap but the other three (pic 3) have a deep one and are all the same... i hope someone can seriously help me.

 

http://www.wheelsforless.com/SearchR...Manufacturer=7

 

so what are you telling me? these caps will fit with my wheels? do you know y the spacing is different on the wheels?

 

I'm not sure why the spacing is different on three not just two or none for that matter but when I punched in those wheels on google I found some center caps for them and as for the spacing is off it could just be a design flaw or in fact a completely different offset

 

i found lots of spacers but none with 3 3/4 inch holes. so do u think that centers will still fit all 4 wheels?

 

I don't see why they wouldn't

 

I have a similar problem in that I can't find any center caps for my wheels on my '99. I e-mailed a company that sells a bunch of AR centercaps on ebay and their reply was "
AT ONE TIME CAPS WERE MADE TO FIT FROM BEHIND THE WHEEL FOR A 5X135MM AND 6X135MM BOLT PATTERN. THEN THE MANUFACTURES FOUND OUT THE PUSH THROUGH CAPS HAD PROBLEMS. THE METRIC BORE SIZES STARTED IN 1997. SO, ALL WHEELS IN THE FORD BOLT PATTERN STARTED BEING MADE IN A FRONT SNAP APPLICATION. THE PEOPLE WHO HAVE THE EARLY MODEL WHEELS ARE JUST STUCK AS NOTHING WILL FIT.

I ANSWER EMAILS ON THIS VERY APPLICATION ABOUT TWICE A YEAR.


I WISH I COULD HAVE HELPED YOU,"

So, I am wondering if you had any luck. Attached is a pic of my wheel.