I need to know how to get the right lift for my 2wd. How can I lift it and it not look bad with it being unlevel?

 

how many inches of lift are you thinking about? are you wanting to lift it and level it, or are you just wanting to level the front out with the back?

 

I was thinking 2 or 3 inches. Like I want it to look good so yeah would I have to lift it first then level?

 

well youd lift and level at the same time probably, youd lift the front probably 3", then youd lift the back however much it took to level it with the lifted front. first id measure the front and see how much lower it is than the back. you could get 3" spacers for the front, then blocks for the back. 3" spacers would put the front probably an inch or two higher than the back im guessing, so then you would just get either a 1" or 2" block which would level it out.

 

Okay so the spacers are for the front and the blocks are for the back? And how much do these go for?

 

im not sure, ebay you can probably get the coil spacers for around 50 bucks, and the blocks you would probably be 70-100 on 4wheelparts.