Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Left signal problem

Thread Tools
 
Search this Thread
 
Old Sep 2, 2009 | 07:51 PM
  #1  
98fordcurtis's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2009
Posts: 3
Likes: 0
Default Left signal problem

98 f-150, 4.6
left turn signal failure, replaced bulb, no help, what is next step
Reply
Old Sep 2, 2009 | 08:18 PM
  #2  
2wdf250's Avatar
.....
 
Joined: Jul 2009
Posts: 262
Likes: 0
From: Grand Prairie,Tx
Default

fuses. wiring shorts?
Reply
Old Sep 2, 2009 | 08:28 PM
  #3  
98fordcurtis's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2009
Posts: 3
Likes: 0
Default

if it was a fuse wouldn't both lights stop working?
Reply
Old Sep 3, 2009 | 01:57 PM
  #4  
Good old Bill's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 4,658
Likes: 28
From: Henderson, NV.
Default

The bulb that doesn't work, check its socket for discoloration, burning stuff like that, sounds like poor connection. The sockets are replaceable.
Reply
Old Sep 4, 2009 | 06:48 PM
  #5  
98fordcurtis's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2009
Posts: 3
Likes: 0
Default

I put a circuit test on everything including the wires that go into the plug itself, no power at all......Is there a fuse that operates that signal? what is next step..this is frustrating
Reply
Old Sep 4, 2009 | 08:55 PM
  #6  
2wdf250's Avatar
.....
 
Joined: Jul 2009
Posts: 262
Likes: 0
From: Grand Prairie,Tx
Default

well its probably shorted out then, no i wasnt paying attention when i said fuse
Reply
Old Sep 10, 2009 | 08:57 AM
  #7  
jlgibby's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 2
Likes: 0
From: Iowa
Default

Is it both left bulbs that don't work or just 1. I have a problem with mine, also the left side. My front bulb won't work. Tried changing bulbs and flasher but it didn't help. try your 4 way and see it that works. It does on mine. I' thinking it may be in the switch itself.
Reply
Old Sep 11, 2009 | 03:23 PM
  #8  
jlgibby's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 2
Likes: 0
From: Iowa
Default 98fordcurtis

I just took my turn signal switch apart and the contacts are all corroded. As I said in my previous post, the problem lies in the switch itself. A new one at Orielly's costs 54 dollars and change, but if you're careful, you can clean the original up and it will work as good as new.
Reply




All times are GMT -4. The time now is 10:22 AM.