Hey Everyone,

Looking to tap into the brain trust here...Ive seen a few trucks here with larger LED bars mounted right at the bottom of the grille on top of the bumper. Just curious how hard it is to get at that area for mounting purposes.

Also had a question for Browning about the 6 inch LED bar install to replace the stock fog lights. Did those mount to the stock bracket? Or how did you mount those? Anything special i need to know before i go ahead and do it?

 

Browning has a write up on his profile on how.
I have a write up on a 32" behind the grille

 

I'm kinda new to the site. Could you direct me to them??

 

https://www.f150forum.com/f6/32-curv...-grill-318896/

 

https://www.f150forum.com/f6/99-03-l...nstall-201669/

 

01f150hd beat me to it thanks hd
To op- if you have any questions about either or lights in general try to find the correct thread and post there. I have personally done both, I have actually done the fog light mod about 3 or 4 times

 

Thank you both for the help! Ill do that in the future. Any tips or unknown stuff i should know before doing the fog light mod that you know of?

 

Also-What are the measurements on those led bars you used??? I found it hard to find actual "6 inch" bars.

 

Nilight 7" 36w Spot LED Work Light Off Road LED Light Bar 12v Driving Lights Super Bright for Jeep Cabin Boat SUV Truck Car ATVs,2 Years Warranty https://www.amazon.com/dp/B00AZPP0Y6..._LRyxybPYJRS9K

A week after I got these one for condensation inside. Haven't gotten any since. Light output is poor but alls to be expected with it being so cheap

 

Awesome...Thanks again for the help! Looks like an easy install