yeah lol id would either run it through the third brake light or either run it through the back door on your truck that would be easyest to do

 

Well I will look for that vent thingy behind my rear seat

 

are you gonna put the antenna on top of the truck ?

 

Yep, but I think I know were your going with this.....is the cable gonna be long enough to reach the dash????

 

if its not you can always add to it see here is how mine are except they aint go no visible cables the one you see is from the light

 

Ok that looks good.....and that light is awesome!!
I found the holes at the back seat will try and see if the cable reaches!!!

 

lol see my antenna are permantley mounted there

 

do you have any more pics of the light?

 

yeah heres another one before i dont the antennas like that and i just had one in the middle

 

I've got 4ft dual whips coming out of my bed, right where the caps are for a rack. Had to make a few cuts on the inside of the bed to mount the attenas with some self tappers, ran the attena up underneath the truck and through the firewall. Fiberglass attenas are real finicky with grounding, so I had to run a grounding cable from the attena to the frame to get good ground.