So I am running into two problems recently and can't find a solution to either.

Anyone know where I can find a steering shaft extension and maybe some new metal shims.

Second issue is way more perplexing. After I take the key out of the ignition the truck still thinks it is on. I don't mean it stays running but i just mean all the electronics stay on.

 

all these lifted trucks and no one has a idea where to get a steering extension?

 

With the doors closed or open? Does the fan continue to run? You shouldn't need a steering shafts extension. The steering box has not moved in position from the steering wheel. Unless you mean a drop pitman arm. But I think you are going to spend a lot of unnecessary money and still have bad ride quality unless you lose the lift spacers and go with a spindle lift up front.

 

I just realized you must have a body lift right?

 

Also if it's the shims I'm thinking you mean then check out Zone Off road Products.

 

yeah and the stock steering shaft is to small. I mean it works but their is alot of wiggle because it is not connected as far down as it should because it stretched.

As far as the noise. When I take the key out the ignition still thinks a key is in so I can run all my electronics without the key in I just can not start it without the key or keep it running.

 

need something like this but this is in Australia and expensive

 

yeah the shims are stretched and broke also matter of fact only one was on i think the other must have fallen off somewhere

 

Where are the shims you are referring to?

 

I emailed performance accessories about a steering extension, because they include them in there body lift kits, to see if they sell them separately. I'll let you know what I hear back.