Factory Tech Valve Body Questions!
Has anyone done this mod to their transmission?
Its as simple as just taking out the old valve body and putting in the upgraded one?
Do I need a chip in order for it to be effective?
Any feedback would be greatly appreciated!!
Its as simple as just taking out the old valve body and putting in the upgraded one?
Do I need a chip in order for it to be effective?
Any feedback would be greatly appreciated!!
http://www.becontrols.com/index.htm
If you want to install a valve-body kit, these guys have what you want and will provide you with all the info you need to make the change.
You may be better off spending the bucks and getting the Baumannator TCS transmission controller. It'll get you most of the performance benefits of a valve-body kit without ever having to open the tran. Take a look at it on the Baumann site.
Last edited by Kattumaram; Mar 18, 2009 at 09:48 PM. Reason: More Info:
changing the valvebody is just a change, you do not need a tune, but contact Alan at dirtydog performance. His quality is better, he hand builds his own convertors, and does a better quality job than bauman. Bauman is great if you want to run a 4R70W with an EEC-IV car or a carb'd application.
So if I get the Valve Body and just install it everything will be fine. But if I want to control when my truck shifts then I should look into a controller. Correct?
BTW I was going to follow this write up
http://www.fordf150.net/howto/trannyvalvebody.php
And I have 113k on my truck this wont damage my tranny in any way will it?
BTW I was going to follow this write up
http://www.fordf150.net/howto/trannyvalvebody.php
And I have 113k on my truck this wont damage my tranny in any way will it?
So if I get the Valve Body and just install it everything will be fine. But if I want to control when my truck shifts then I should look into a controller. Correct?
BTW I was going to follow this write up
http://www.fordf150.net/howto/trannyvalvebody.php
And I have 113k on my truck this wont damage my tranny in any way will it?
BTW I was going to follow this write up
http://www.fordf150.net/howto/trannyvalvebody.php
And I have 113k on my truck this wont damage my tranny in any way will it?
Trending Topics
Hey guys I just bought an edge evolution controller yesterday for $185!! So I have that part done. And I'll probably do the valve body over the summer.
P.S The evolution is badass. Whole different truck.
P.S The evolution is badass. Whole different truck.
I always wanted to use one of these but never got around to ordering one but for that price
How does it drive?
Milage... Power.. Shifting.. towing... Overall Performance?

