need a lil advice here, so i got my old exhaust almost completely removed after about 3 hours of cutting with a damn dremel saw so i can put on my new exhaust... the only part i need to take out now is the pipe that leads from the old muffler to the catalytic converter. seems to be on there pretty good from the many years that its been there. doesnt appear to be welded on there either. i need to remove it without damaging the other pipe its connected to so i can slip on the new mid pipe. i hosed it down with wd40 and tried physically taking it off with no luck. had a real good grip on it and boot stomped it several times with no budge. do i need to twist it off? how in the hell can i get it off? thanks!

 

was the same on my buddies f250. we cut the pipe off right at the conecting part then stuck a saw sal in the pipe made u 2 cuts and broke the inside one in half

 

ya worked on it about 4 more hours today. kit did not come like they said it would! had to cut alot of stuff i wasnt suppose to... i gave up, gonna take it to a shop on mon.

 

a small torch with map gas or propane will slip it off i`ve done it a few times before... its thin enough tubing where u dont need a big torch