Hi. I searched the forum and tried to disconnect the key in chime from my '98 F150. I pulled the black and pink wire from the ignition switch and as I did so, the chime quit. I put heat shrink over the connector and put it back up in the housing. Put the truck together, put the key back in and the chime still works! What did i do wrong? I'm pretty sure I didn't pinch the wire. It is just a ground, correct? Thx for the help.

 

I have a thread that should come up. Check the faq

 

if you want to delete/remove the chime for all warnings it is inside the GEM, under the dash behind the fuse box, remove it and replace it with a 1/4 watt 100 ohm resistor.

 

Just pull the fuse

 

dont even have to use a resistor.

 

Which fuse ?

 

Look in ur owners manual and it will tell u what fuse it is

 

No such fuse. You have two options, cut a wire or pull the chime out if the gem.

 

Bull **** there r fuses for the chime

 

Please find all of them for me then.