Hey I'm new to the forum,
My ABS light came on when I was driving down the highway. When I turned the car off the pump was still making a noise. I took the fuse out because that was the only way to stop it. Have been driving around without the fuse in and everything seems fine.

Is there anything I need to worry about?

 

Yeah, not having ABS when you need it. Sounds like something is shorted or there's a relay stuck closed somewhere.

 

Your brakes will work fine without it.... but you probably want to address the issue, especially if it's something as simple as a relay. I'd plug it back in and scan it if you have an ABS scanner. Some Autozone's have them.... some don't.

EDIT: I guess I should mention that more than likely, your ABS controller is bad.

 

I found it.... here's a how to that was posted here on this site. It tells you what you need, and how to rebuild your controller. Hope it helps!

https://www.f150forum.com/f6/diy-abs...7/#post1634106

 

Problem with leaving the fuse pulled for abs is that that's not all that is on the same fused circuit, but will do in a pinch

 

Good sources to fx the module cheap.