75mm throttle body?
#1
Senior Member
Thread Starter
75mm throttle body?
I am looking at this
http://www.troyerperformance.com/cgi...catalogno=3874
im not sure if this is the one I want or not, but it looks like it.
worth the 200 for it, or can I find it cheaper, Im up for a used one too, if anyone knows of one.
then probally a larger maf?
http://www.troyerperformance.com/cgi...catalogno=3874
im not sure if this is the one I want or not, but it looks like it.
worth the 200 for it, or can I find it cheaper, Im up for a used one too, if anyone knows of one.
then probally a larger maf?
#2
none.
Join Date: May 2007
Location: West Palm Beach, FL
Posts: 3,840
Likes: 0
Received 98 Likes
on
78 Posts
waste of cash. I had a 70mm FRPP one and glad I got it for only 60$ used. The factory throttle body will flow enough.
a larger MAF would be nice, but would require proper calibration. The key is getting a good one, not that C&L or Pro-M crap, but a larger Ford MAF, such as a Lightning or 02-04 GT MAF, as the sensor electronics are more accurate and really aid in driveability, helping to eliminate flat spots in the power band and will help fine tune the A/F curve.
a larger MAF would be nice, but would require proper calibration. The key is getting a good one, not that C&L or Pro-M crap, but a larger Ford MAF, such as a Lightning or 02-04 GT MAF, as the sensor electronics are more accurate and really aid in driveability, helping to eliminate flat spots in the power band and will help fine tune the A/F curve.
#5
Resident A-hole
On a stock motor its worth about 5 - 7 hp. So if its worth it then get it. Along with the larger MAF. You have a CAI and a tuner right? I plan on getting one for mine.