6in fabtech and crank the T-Bars?
#1
Senior Member
Thread Starter
6in fabtech and crank the T-Bars?
I have the 6in Fabtech on my truck and I want to run 37's again but I want to get more lift out of my truck.... I wouldn't mind getting a body lift but I can't do to my winch in front coming out of the bumper and fitting perfect in there.... Has anyone else with the 6in fab cranked the Tbars? Or is there another way to get my truck bigger? haha
#2
Senior Member
Old member, some time ago by the name of twin had the fabtech (iirc) cranked up for 37's. Beast of a truck. I'm pretty sure he was on this forum too. He had a red screw 10th gen.
#3
Yes you can over crank them with the fabtech lift. I would recommend taking the front axle spacers to a machine shop and have them remove 1/8" from the back side of the spacer. It will give the axles more room to flew and help prevent binding.
#4
Rammer Jammer
#5
December 2009 TOTM!
98blue54 had 6" lift with tbars crand with 37s... before it was rolled. I think it had a 1" AAL in the rear but you don't need the AAL to fit a 37 in the rear. I got 6" Fab and theres plenty of room for 37s. I'm looking at a used set right now.
#6
Trending Topics
#8
According to Fabtech you set them to 29.25" from center of the wheel well to the center of the hub loaded. So you can add at least another 2". I have over cranked them on many trucks to 31.25"-31.75"