Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

6 Codes being thrown

Thread Tools
 
Search this Thread
 
Old Feb 1, 2008 | 12:52 PM
  #1  
S331F-150's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2008
Posts: 4
Likes: 0
Default 6 Codes being thrown

P0171 Sys too lean bank1
P0174 Sys too lean bank2
P0301 Fault cylinder A-Misfire detected cyl1
P0456 EvapEmission Control sys. Very small leak
P0740 Torque converter clutch cir. malfunction
P0743 Torque converter clutch sys electrical failure

The first 4 Not that hard but the last 2 I'm not really sure where to go. would this be located in the trans or between the trans and ECU?
Reply
Old Feb 2, 2008 | 07:34 PM
  #2  
nohsp4u's Avatar
Ford Fan
 
Joined: Dec 2007
Posts: 45
Likes: 0
From: Ca
Default

Per my Factory Manual set to a 2001 5.4 engine, since i have no idea what you have. In the manual it states to ensure the Main transmission connector is properly connected. I would disconnect and clean the connector with an electrical cleaner then reconnect, clear the codes and see if the codes come back. The Manual i have is for dealer mechanics, and i do not have the knowledge or equipment to complete all test the maual requires.
Reply
Old Feb 3, 2008 | 02:00 PM
  #3  
S331F-150's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2008
Posts: 4
Likes: 0
Default

Sorry I forgot to put what year and motor it was. Its a 2001 with 4.6L 2WD
Reply




All times are GMT -4. The time now is 05:34 PM.