03 fx4 5.4 2v heads
#1
03 fx4 5.4 2v heads
Does anyone know of a company that build heads for the triton
My end goal is to make about 350 at the wheels so i figured bigger valves and all that ****
My end goal is to make about 350 at the wheels so i figured bigger valves and all that ****
#2
TRICK FLOW.
You won't need any more airflow with these heads.
The valves are move a bit, so the cams, to be the best will need to be dialed in differently with a degree wheel.
We run them on a 4.6L custom cammed and get just over 400 at 6800 rpm for road racing in a Mustang.
You will need more changes that just the heads.
Like bigger injector flow etc. to feed the power expected.
Call them and discuss what you want to accomplish and for what application.
Be sure you have deep pockets.
To make it a bit cheaper, consider a Lincoln double overhead Alum motor.
They have higher flowing heads in 3 versions and can purchase them already ported for more but still won't match the Trick Flows.
Good luck.
You won't need any more airflow with these heads.
The valves are move a bit, so the cams, to be the best will need to be dialed in differently with a degree wheel.
We run them on a 4.6L custom cammed and get just over 400 at 6800 rpm for road racing in a Mustang.
You will need more changes that just the heads.
Like bigger injector flow etc. to feed the power expected.
Call them and discuss what you want to accomplish and for what application.
Be sure you have deep pockets.
To make it a bit cheaper, consider a Lincoln double overhead Alum motor.
They have higher flowing heads in 3 versions and can purchase them already ported for more but still won't match the Trick Flows.
Good luck.
The following users liked this post:
FatJesus7 (12-26-2021)