Topic Sponsor
General F150 Items

North Central: FS: Audio system, Custom Sub Box

Thread Tools
 
Search this Thread
 
Old 12-22-2016, 08:03 PM
  #1  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default FS: Audio system, Custom Sub Box

As much as I hate to sell my system, I had to make the decision to either install it from my '09 F150 and put into my '16 or sell it. My heart is not really into doing the work I would want at same level as my previous truck and my '16 actually sounds pretty good. My '09 was totaled by oncoming driver deciding to make a left turn in front of me while I was doing 45mph. So selling and don't mind parting some of it out, but my sub box and subwoofer will not be seperated. Also realize, prices do not include shipping costs. I will need to work out those details before selling as the sub/box alone weighs 27lbs. Items are in Lake Orion, MI for reference location. The sub box was made for the '09, but fits very well for the 16 as well. My seat is just slightly raised as can be seen from the pics, it will sit flush if the weather liner on the floor is cut out. I had to do that for the '09 as well.

Stereo Integrity MKIII - this is a 12" sub that was worth every penny I paid for it. It was designed for 0.5 cu ft space and being shallow mounted, very little space was required to get this singing and thumping. This component was my favorite piece of the system and will let internet reviews speak for themselves.

Sub box - custom made out of 3/4" MDF, stuffed with a sealed volume for 0.5 cu ft. It fits perfectly under the rear passenger seat on my '09 and also my '16. It was glued and screwed together for incredible strength and no flexing. The box and SI MKIII will not be seperated, they were designed and built as a system - $275.

Audison LRx 1.400 - this drove my SI MKIII; I ran it with 4ohm load with 350W rms, easily provided more than enough power. I bought this used but was one of the few amps at the time that was known for creating quality sound and power. $125

Hertz HV165 2-way component - These were my front drivers, bought from authroized Hertz dealer. Provide a great sound. Goal of my system was to provide some volume, simply and with quality. These were high passed at 80Hz. Crossovers will be included. I still have some putty on the rears that are still showing up in the pics. $100

Cadence ZRS C9 - This is a great mid level competition amplifier. I bridged it so I can drive my Hertz with 300W for each side. The Hertz speakers liked being overdriven. $100

If somebody buys it all, though amp board was damaged on the bottom during removal, everything attached will be included: Maxxsonics MX-1 line level input/amp turn on/bass remote level, Monster Wire RCA's for both amps, subwoofer output wire Knu silver flex wire, power feeds to both amps Knu Kolossus 4AWG, Power feed for Hertz crossovers, Streetwires Fuse splitter (100A fused outputs). Please note again, prices above do not reflect shipping costs. Have any questions, please don't hesitate to ask. Thanks.




Last edited by stormsearch; 12-23-2016 at 07:42 AM. Reason: Adding Info
Old 12-22-2016, 08:07 PM
  #2  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default Additional Pictures

2009 F150
2009 F150
2009 F150
2009 F150
2009 F150
2009 F150
Old 12-22-2016, 08:10 PM
  #3  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default Additional Pictures

2016 F150 Screw, fitment is actually a tad better. I have the inverter. Seat lays down flush.
2016 F150 fitment, taken from front angle
2016 F150 fitement, side shot
Old 12-22-2016, 08:19 PM
  #4  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default Additional Pics

Rear of speakers showing damage being exposed to moisture from inside door panel
Audison LRx 1.400
Cadence ZRS C9 competition amp
More detailed pic's of Hertz 165's
Amp board as of today, bottom damage from removal (Added components for reference)
SI MKIII as of today, still in perfect condition.
Old 12-22-2016, 08:28 PM
  #5  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default And reason why this is for sale

The labor hours dissapeared from the all the work
Old 12-22-2016, 11:04 PM
  #6  
Senior Member
iTrader: (2)
 
18Steel's Avatar
 
Join Date: Mar 2012
Location: New Jersey
Posts: 106
Received 10 Likes on 6 Posts

Default

Well I hope everyone is ok. If you do t mind me ask g, how did that happen?
Old 12-23-2016, 03:50 PM
  #7  
09 FX4
Thread Starter
 
stormsearch's Avatar
 
Join Date: Aug 2009
Location: MI
Posts: 693
Received 179 Likes on 89 Posts

Default

Originally Posted by 18Steel
Well I hope everyone is ok. If you do t mind me ask g, how did that happen?
- oncoming driver deciding to make a left turn in front of me while I was doing 45mph. We all survived with no major injuries but not an experience would like to share again.
Old 12-24-2016, 10:42 AM
  #8  
Now an XLT in Colorado
 
OhioLariat's Avatar
 
Join Date: Aug 2016
Location: Woodland Park, CO
Posts: 5,290
Received 2,311 Likes on 1,502 Posts

Default

Glad to hear everyone was OK.

Some nice equipment here, and that sub box looks perfect! Good luck with the sale.

Andy
Old 12-25-2016, 09:58 AM
  #9  
Fake Ballin for da Gram
iTrader: (12)
 
white_dc's Avatar
 
Join Date: Jun 2011
Location: NE Florida
Posts: 3,017
Received 434 Likes on 366 Posts

Default

Great price on the SI sub..
Old 02-08-2017, 08:09 PM
  #10  
Junior Member
 
jlfirehawk's Avatar
 
Join Date: Dec 2016
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

How feasible would it be if you removed the metal base for that sub to fit in a 06 SCAB?




All times are GMT -4. The time now is 08:09 PM.