Window Stopped Working
Hey yall, i just recently ran into an issue with my 06 F150 King Ranch. the window stopped working from all 4 switches but the rear sliding window still works fine. went in earlier today and bought a new accessory relay and whatever the 30A window fuse is. neither worked. also just bought a new master switch for the driver side and it comes tomorrow. i’m worried the new switch won’t be the issue either. also, it works when it wants to. i just got it to work a few minutes ago and it was just fine but for the last couple days it doesn’t want to operate correctly. has this happened to anyone else?
Edit: forgot to mention that the heated mirror light comes on while pressing the switch. when i stop pressing it, the heated mirror light turns off. another issue is the light in the switch and the door lock button all turn off when i press the window switch. but again, once i let go it decides to come back on. not sure if that’s supposed to happen. the mirrors also didn’t want to fold in until i put the 2 new fuses in and now they fold correctly but the windows still don’t work
Edit: forgot to mention that the heated mirror light comes on while pressing the switch. when i stop pressing it, the heated mirror light turns off. another issue is the light in the switch and the door lock button all turn off when i press the window switch. but again, once i let go it decides to come back on. not sure if that’s supposed to happen. the mirrors also didn’t want to fold in until i put the 2 new fuses in and now they fold correctly but the windows still don’t work
Last edited by Revoust; Feb 19, 2024 at 04:56 PM.
TEST VOLTAGE TO THE DRIVER WINDOW CONTROL SWITCH
TEST GROUND TO THE DRIVER WINDOW CONTROL SWITCH
- Disconnect wire connector at switch
- Turn key to ON position
- Measure the voltage between the LB/BK wire in connector and ground
- Should get battery voltage
- With voltmeter still connected, wiggle black, accordion, rubber boot between door and body to check for voltage changing while wiggling
TEST GROUND TO THE DRIVER WINDOW CONTROL SWITCH
- Disconnect wire connector at switch
- Measure the resistance between the BK wire in connector and ground
- Should get continuity
- With voltmeter still connected, wiggle black, accordion, rubber boot between door and body to check for resistance changing while wiggling
Last edited by getterdun; Feb 20, 2024 at 01:23 PM.






