Ok, I've read and read and read some more but I'm not sure...I have an 06 F150 4x4 with a 2.5 leveling kit. I'm looking at putting 1 of these on with 35's if they will fit. What do you guys think?

17x8, Bolt Pattern 6x135 Backspace = 4.26 in. Max Load = 2200lbs Finish = Chrome Hubcentric = No Offset = -6 mm

17x8, Bolt Pattern 6x135 Backspace = 4.5 in. Max Load = 2200lbs Finish = Chrome Hubcentric = No Offset = 0 mm

17x9, 6x135 Bolt Pattern Backspace = 5.39 in. Max Load = 2200lbs Finish = Chrome Hubcentric = No Offset = 10 mm

18x9, 6x135 Bolt Pattern Backspace = 4.61 in. Max Load = 2200lbs Finish = Chrome Hubcentric = No Offset = 10 mm

I'm currently running 33's on DC1's and they rub a bit when I'm backing up and turning the wheel.

Thanks....

 

What are the specs on the DC-1s and where are they rubbing?

 

Not sure what the specs are but they are pushed pretty far out. They hit the lower plastic piece on the corners under the bumper. It only does it in reverse and when I'm turning the wheel.

On a side note....How does Brantly look for this year?

GO GATORS!!!!!!!!!!

 

Anyone....