Question with my new Edge Programmer
Thread Starter
Junior Member
Joined: Jun 2011
Posts: 2
Likes: 0
Question with my new Edge Programmer
I just bought a Edge Evolution CS GAS programmer for my 05 F150. I have the display screen set to how I like showing my MPH, Real Time MPG and RPM. However I cant for the life of me find out how I can see my average mpg. Can anyone help. Thanks in advance
DIY
Joined: Sep 2010
Posts: 1,325
Likes: 11
From: South Florida and NYC part time
Average MPG is just another option, in the same screen where you pick MPH, Instant MPG and RPM. just keep scrolling. The option should say:
AMPG (average miles per gallon) – This is an average of the MPG
over a long period of time.
You can also download the manual here: http://www.edgeproducts.com/download...pvk=277&type=2
if im right, you press the MENU key, then select SETUP, then select DISPLAY, then select 4 Function Digital, you will see your current four selections, pick the one that you want to replace with AMPG, then press ENTER and look for the AMPG option. it should be there. you finish pressing MENU, then selection the opcion Set As Display.
AMPG (average miles per gallon) – This is an average of the MPG
over a long period of time.
You can also download the manual here: http://www.edgeproducts.com/download...pvk=277&type=2
if im right, you press the MENU key, then select SETUP, then select DISPLAY, then select 4 Function Digital, you will see your current four selections, pick the one that you want to replace with AMPG, then press ENTER and look for the AMPG option. it should be there. you finish pressing MENU, then selection the opcion Set As Display.
