power steering pump removal
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 12
Likes: 1
5 Year Member
Joined: Dec 2012
Posts: 939
Likes: 86
2004 F150 5.4 3 valve
having a difficult time get a wrench on the lower bolt to back off power steering pump from block
the high-pressure fitting is blocking my attempts
open end 10mm isn't working, would like to get a gear wrench on it to back it off
any suggestions on this issue?
having a difficult time get a wrench on the lower bolt to back off power steering pump from block
the high-pressure fitting is blocking my attempts
open end 10mm isn't working, would like to get a gear wrench on it to back it off
any suggestions on this issue?
05 5.4l 3v s.crew lariat
Joined: Oct 2009
Posts: 3,505
Likes: 672
From: fl
When I did timing that pump mount made me so mad I almost forgot how to cuss .
I have a lot of tools ,went out and bought more little ones-- still was a bugger. If there was a modification to mount to make it easy I would do it even if it cost $200 bucks. I think I worked from underneath towards rear of engine and tore my hands up a little at a time .I tried to get pulley off and almost ruined it .
Good luck with it .
Good luck with it .
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 12
Likes: 1
Power steering pump
I have a lot of tools ,went out and bought more little ones-- still was a bugger. If there was a modification to mount to make it easy I would do it even if it cost $200 bucks. I think I worked from underneath towards rear of engine and tore my hands up a little at a time .I tried to get pulley off and almost ruined it .
Good luck with it .
Good luck with it .
it is a terrible design I did order a pulley remover/installer kit
like you said it may come off or not
the pump will come off one way or another right
thanks man!