Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

please listen to video

Thread Tools
 
Search this Thread
 
Old Dec 16, 2018 | 09:54 PM
  #1  
newer f150's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2018
Posts: 8
Likes: 0
Default please listen to video

ok, this is what happened yesterday. literally out of no where when I was making a right turn going like 2 mph. I heard a aluminum clanging sound. (sounded like a thin piece of metal or something was scraping and bouncing off of the ground). The truck also shuddered a little bit as if when you do not give enough gas in a stick shift car and it jumps or shudders. It went away but I pulled over. I looked underneath and nothing. everything was fine. I listened to the truck from the wheel well on the drivers side and it did sound a little louder than it has before with the ticking and it kind of had a gurgling sound.(like a diesel or when the bottom end is going. not loud at all though) I drove forward and back and I heard the same sound as before when I was turning but way quieter. At this time the truck was probably driving for about 3 hrs on and off. I drove home and it took like 15 min. on the way home the truck had a very little vibration. (like going over p gravel). it had all kinds of power though, no hesitations, no stalling, no nothing and idled fine. As I turned into the drive the clang noise came back and my the time I got to the garage (maybe 100ft) all hell broke loose. it got super loud as if something was on the inside of the motor pounding to get out. I went out this morning to see if a pully was loose or the plugs popped out but all was good. I started it back up and it was relatively quiet. ( I guess the normal 5.4 injector sounds maybe) I drove up and down the street and it was fine. as it started to warm up the noise would get louder and sound like a quiet diesel again. these videos are of today after it got warmed up. Ok. this is my question. Is this the dreaded 5.4 tick and clang that need the front of the engine redone and to check the hydraulic lifters and rockers? O. their was no engine light on. No codes. It was running fine. Seriously. it just happened. Maybe my ears are not trained yet to here the correct signs yet.
Reply
Old Dec 16, 2018 | 09:58 PM
  #2  
newer f150's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2018
Posts: 8
Likes: 0
Default

ok. my videos are supposed to be attached, but I do not see them. what did I do wrong? they were on my phone. I put them on the desktop and attached them to my thread.
Reply
Old Dec 17, 2018 | 08:45 AM
  #3  
SCORGE's Avatar
SSDD
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2016
Posts: 17,606
Likes: 1,619
Default

I think you have to youtube it
Reply
Old Dec 17, 2018 | 09:24 AM
  #4  
BadFish523's Avatar
Moderator
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2015
Posts: 5,793
Likes: 695
From: Arlen, Texas
Default

Upload it to youtube and put the link in here.
Reply
Old Dec 17, 2018 | 10:43 AM
  #5  
DarrinT04's Avatar
Senior Member
Supporting Member

5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2018
Posts: 6,693
Likes: 1,222
From: Maysville KY
Default

Originally Posted by SCORGE
I think you have to youtube it
that is the easiest way to do it. it might be the only way
Reply
Old Dec 18, 2018 | 06:56 PM
  #6  
newer f150's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2018
Posts: 8
Likes: 0
Default

Reply
Old Dec 18, 2018 | 07:42 PM
  #7  
SCORGE's Avatar
SSDD
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2016
Posts: 17,606
Likes: 1,619
Default

To my ears, sounds like phaser knock.
Reply
Old Dec 18, 2018 | 07:49 PM
  #8  
DarrinT04's Avatar
Senior Member
Supporting Member

5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2018
Posts: 6,693
Likes: 1,222
From: Maysville KY
Default

Originally Posted by SCORGE
To my ears, sounds like phaser knock.
^this. common in the 5.4's of this time once high in miles
Reply
Old Dec 23, 2018 | 11:03 PM
  #9  
newer f150's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2018
Posts: 8
Likes: 0
Default

ok thanks.

what is the best phaser kit? ( I want to do it once and be done, and not do it again in 4 months)
Reply




All times are GMT -4. The time now is 04:33 AM.